|
* Name:
|
|
|
* Company Name:
|
|
|
* Title:
|
|
|
* Address 1:
|
|
|
Address 2:
|
|
|
* City:
|
|
|
* State:
|
|
|
* Zip:
|
|
|
* Phone:
|
|
|
* Fax:
|
|
|
Email:
|
|
|
Proposal Required by this date:
|
|
|
|
|
* Areas marked with a red asterisk are required.
|
|
|
|
Please fill out the following form as complete as possible.
|
|
|
| 1. Gas Volume: ACFM |
2. Gas Temperature: °F |
| 3. Gas Composition: |
|
Components & Amount (Specify Units)
example - Oxygen at 100 lbs./hr.
|
| 4. Contaminant(s) to be reduced: |
|
Contaminant & Outlet Loading or Removal Efficiency (Specify Units)
example - Hydrochloric acid at 90 lbs./hr.
|
|
| 5. Liquid or solid particulate size distribution: |
Size Microns Less than, equal to, or greater than (%)
example - 10 less than 20%
|
|
6. If there is a maximum allowed pressure drop for the pollution device, state what it is:
|
7. Any specific scrubbing solution you would like to use. If so, state composition, temperature and, if applicable, quantity available:
|
8. Do you want us to select an appropriate chemical reagent or scrubbing solution, if applicable quantity available:
|
9. Preference on material of construction for the unit or are we to advise and select:
|
10. Is the particulate contained in the gas stream of a sticky or tacky nature:
|
11. Quantity of water available for makeup, if needed; GPM:
|
12. Maximum allowable blowndown rate; GPM:
|
13. Is it preferred to use a batch scrubbing solution or continuous automatic reagent addition. If on a batch operation, how long a period of time do you require the batch to last before blow down and replacement is needed:
|
14. If applicable, what are the cooling water rates and temperature available for process cooling:
|
15. Supply of accessory components (e.g. pumps, pH control addition system, fan, water makeup package, instrumentation, control panel, piping and valve network, skid-mounted unit, etc.). List the items required:
|
16. If we are supplying electrical controls or motor driven equipment, furnish the voltage and power available including electrical area classification for equipment:
|
17. Is freeze protection required for outdoor service. If so, state components requiring insulation and heat tracing:
|
18. If a fan is to be supplied with the system, what is the external static pressure drop of the system without the scrubber:
|
19. Additional information:
|
